3CR Tactical

Drops into Glock 19 Gen 1-3 slides with no fitting and no lapping. Gen 4 slides require a Gen 3 recoil rod with an adapter; Gen 5 frames are not compatible.Machined from 416R stainless steel and...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C compact builds. Assembled 3CR Tactical slide in black DLC with a Trijicon RMR optic cut and standard-height iron sights installed.Ready to drop...

DLC-finished slide for the Glock 17 Gen 3, assembled and paired with your choice of 9mm barrel from the dropdown. Diamond-like carbon outlasts standard nitride coatings under holster wear and carbon...

Fits Glock 19 Gen 3 OEM frames. Ships fully assembled — completion kit, sights, and cover plate are installed and verified before it leaves our Florida shop. Drop it on your Gen 3 lower and you have...

Compact DLC window slide built for Glock 19 Gen 3 frames and paired with your choice of 9mm barrel. Diamond-like carbon finish gives a harder surface than nitride and stands up to holster rub, oil,...

All the required internal parts to complete a Glock 26 slide and a Glock 26 or Polymer80 PF940SC frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x spring...

This Glock slide is precision machined in Melbourne, Florida, from 100% American-made 416 stainless steel. Further, its heat treated to 38-42 HRC for optimal strength and durability. Our standard...

Assembled DLC window slide built for Glock 17 Gen 3 frames. Diamond-like carbon finish gives a harder wear surface than standard nitride - resists holster rub, oil, and carbon fouling without flaking...

Full-size DLC window slide assembled for Glock 17 Gen 3 frames and shipped with your choice of 9mm barrel. Drops onto any Gen 3 G17 frame with no fitting. Hard diamond-like carbon finish resists...

The Glock Micro Comp is threaded in the standard 9/16x24 thread pitch for .40S&W/10mm barrels.It will work on most .40S&W/10mm Glock threaded barrels. The Micro Comp only adds about .45" to...

This nickel-plated locking block is a direct drop-in for Glock 19, 23, 32, and 38 Gen 3 frames using the 3-pin locking-block layout (2013 and later production). Machined from 17-4 stainless and...

All the required internal parts to complete a Glock 43 slide and a Glock 43 or Polymer80 PF9SS or SS80 frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x...

Glock 19 Black Nitride ported 9mm barrel — drop-in replacement for Gen 1, Gen 2, and Gen 3 factory frames. Machined to OEM chamber and lug geometry so it seats directly into your factory or...

Stainless steel recoil rod and spring assembly for compact Glock pistols (Glock 19, 23, 32, 38) in Gen 1-3 configuration. Direct drop-in upgrade over the factory polymer rod — same dimensions, same...

This barrel is a drop-in replacement for the factory Glock 43 barrel.9mm caliberMatte, bead blasted stainless steel finish DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc. and is...

Stainless steel recoil rod and spring assembly for full-size Glock pistols (Glock 17, 22, 24, 31, 34, 35) in Gen 1-3 configuration. Direct drop-in upgrade over the factory polymer rod — same...

Everything needed to complete a stripped Glock 19/23 Gen 5 slide, except for the barrel and sights.All parts are built to OEM spec and made in the USA. Stainless firing pinFiring pin spring &...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C aftermarket frames. Not compatible with Gen 4 or Gen 5. Stripped — barrel and internals sold separately. Hard black DLC finish on 416 stainless...

Fits Glock 17 and Glock 22 Gen 1, Gen 2, and Gen 3 OEM frames plus Polymer80 PF940V2 aftermarket frames. Not compatible with Gen 4 or Gen 5. This is a stripped slide; a 9mm barrel and slide...

OEM-style white dot aluminum front and rear sight set for Glock 17, 19, and 26 Gen 1-3 — anodized black sights at standard OEM height with a sharp three-dot picture for fast target acquisition...

A CNC-machined single-port 9mm compensator threaded 1/2x28 — the same width as a standard 9mm Glock slide (G17, G19, and G26), so it stays flush from the ejection port to the muzzle without...

Glock 26 threaded barrel in 9mm — the drop-in DLC upgrade for a subcompact that shoots suppressed, adds a Micro Comp, or both. Machined to OEM chamber and lug geometry, this Glock 26 threaded barrel...

This barrel is a drop-in replacement for the factory Glock 19 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Black NitrideTighter tolerance than OEM DISCLAIMER: GLOCK is a federally registered...

This barrel is a drop-in replacement for the factory Glock 17 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Black NitrideFits Gen 1-4 DISCLAIMER: GLOCK is a federally registered trademark of...

Drop-in OEM-style green 3-dot iron sight set for the standard-frame Glock. Front and rear dovetails match the Glock factory cut on the Glock 17, 19, 22, 23, 26, 27, 31, 34, and 35 — Gen 1 through Gen...

Fits Glock 19 Gen 1, Gen 2, and Gen 3 OEM frames as well as Polymer80 PF940C and GST-9 aftermarket frames. Designed and manufactured exclusively for 3CR Tactical — this slide is not available through...

Fits Glock 19 Gen 1 through Gen 5 slides — drop-in replacement with no fitting required. This ported barrel uses machined top ports to vent gas upward during firing, reducing muzzle rise without...

Not rated for live fire. This is for demo/training purposes only. Looking for a Demo Training Cutout Slide for your Glock 19? Look no further and get this Raw Slide with all the necessary components...

Fits Glock 17 Gen 1, Gen 2, Gen 3, and Gen 4 OEM slides. Drop-in replacement for the factory Glock 17 barrel — pull the factory barrel during a normal field-strip, seat this one in its place, and...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C aftermarket frames. Not compatible with Gen 4 or Gen 5 — the rail cuts and locking block geometry changed. Stripped slide: barrel and internals...