3CR Tactical

All the required internal parts to complete a Glock 26 slide and a Glock 26 or Polymer80 PF940SC frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x spring...

This Glock slide is precision machined in Melbourne, Florida, from 100% American-made 416 stainless steel. Further, its heat treated to 38-42 HRC for optimal strength and durability. Our standard...

Assembled DLC window slide built for Glock 17 Gen 3 frames. Diamond-like carbon finish gives a harder wear surface than standard nitride - resists holster rub, oil, and carbon fouling without flaking...

The Glock Micro Comp is threaded in the standard 9/16x24 thread pitch for .40S&W/10mm barrels.It will work on most .40S&W/10mm Glock threaded barrels. The Micro Comp only adds about .45" to...

This nickel-plated locking block is a direct drop-in for Glock 19, 23, 32, and 38 Gen 3 frames using the 3-pin locking-block layout (2013 and later production). Machined from 17-4 stainless and...

All the required internal parts to complete a Glock 43 slide and a Glock 43 or Polymer80 PF9SS or SS80 frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x...

Drop-in 9mm replacement barrel for Glock 19 Gen 1, Gen 2, and Gen 3 frames. Machined to OEM chamber and lug geometry so it seats directly into your factory or aftermarket Gen 1-3 slide — no fitting,...

Stainless steel recoil rod and spring assembly for compact Glock pistols (Glock 19, 23, 32, 38) in Gen 1-3 configuration. Direct drop-in upgrade over the factory polymer rod — same dimensions, same...

This barrel is a drop-in replacement for the factory Glock 43 barrel.9mm caliberMatte, bead blasted stainless steel finish DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc. and is...

Stainless steel recoil rod and spring assembly for full-size Glock pistols (Glock 17, 22, 24, 31, 34, 35) in Gen 1-3 configuration. Direct drop-in upgrade over the factory polymer rod — same...

Everything needed to complete a stripped Glock 19/23 Gen 5 slide, except for the barrel and sights.All parts are built to OEM spec and made in the USA. Stainless firing pinFiring pin spring &...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C aftermarket frames. Not compatible with Gen 4 or Gen 5. Stripped — barrel and internals sold separately. Hard black DLC finish on 416 stainless...

Fits Glock 17 and Glock 22 Gen 1, Gen 2, and Gen 3 OEM frames plus Polymer80 PF940V2 aftermarket frames. Not compatible with Gen 4 or Gen 5. This is a stripped slide; a 9mm barrel and slide...

OEM-style white dot aluminum front and rear sight set for Glock 17, 19, and 26 Gen 1-3 — anodized black sights at standard OEM height with a sharp three-dot picture for fast target acquisition...

A CNC-machined single-port 9mm compensator threaded 1/2x28 — the same width as a standard 9mm Glock slide (G17, G19, and G26), so it stays flush from the ejection port to the muzzle without...

Threaded 9mm replacement barrel for the Glock 26 — drop-in fit on Gen 1 through Gen 5 OEM Glock 26 frames with no hand-fitting required. The 1/2x28 muzzle threads accept any standard 9mm compensator,...

This barrel is a drop-in replacement for the factory Glock 19 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Black DLC (diamond like coating)Tighter tolerance than OEM DISCLAIMER: GLOCK is a...

This barrel is a drop-in replacement for the factory Glock 17 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Black DLC (diamond like coating)Fits Gen 1-4 DISCLAIMER: GLOCK is a federally...

Replace the factory front and rear sights on your standard-frame Glock with this OEM-style green 3-dot aluminum sight set. The dovetails match the Glock factory cut on the Glock 17, 19, 22, 23, 26,...

Fits Glock 19 Gen 1, Gen 2, and Gen 3 OEM frames as well as Polymer80 PF940C and GST-9 aftermarket frames. Designed and manufactured exclusively for 3CR Tactical — this slide is not available through...

Fits Glock 19 Gen 1 through Gen 5 slides — drop-in replacement with no fitting required. This ported barrel uses machined top ports to vent gas upward during firing, reducing muzzle rise without...

Not rated for live fire. This is for demo/training purposes only. Looking for a Demo Training Cutout Slide for your Glock 19? Look no further and get this Raw Slide with all the necessary components...

Fits Glock 17 Gen 1, Gen 2, Gen 3, and Gen 4 OEM slides. Drop-in replacement for the factory Glock 17 barrel — pull the factory barrel during a normal field-strip, seat this one in its place, and...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C aftermarket frames. Not compatible with Gen 4 or Gen 5 — the rail cuts and locking block geometry changed. Stripped slide: barrel and internals...

Fits Glock 43 and Glock 43X OEM slides as well as aftermarket slides built to the Glock 43 chamber profile. Drop-in replacement for the factory barrel — no fitting, no gunsmith, just pull your...

17-4 Stainless Steel, 44C Rockwell Hardness (+/- 2) for durabilityStylish and corrosion resistant titanium nitride satin finishFits 3 pin Glock frames (2013+)Fits Glock 19, 23, 32, 38 Gen...

This barrel is a drop-in replacement for the factory Glock 43 barrel.9mm caliberCrown/flush cutMatte DLC finish DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of...

Threaded replacement barrel, coated in titanium nitride for a visually striking finish for Glock 26. Threaded for 1/2 x 28 muzzle devices and fits all generations.Titanium Nitride (TiN) coating1:16...

Parts are compatible with Sig P320 slides chambered in 9mm, 40 S&W and 357 SIG.All parts necessary to complete a Sig FCU or 80% MUP. Includes:Trigger stop pinSlide catch lever pinSafety lever...

17-4 Stainless Steel, 44C Rockwell Hardness (+/- 2) for durabilityStylish and corrosion resistant titanium nitride satin finishFits Glock 42, 43, 43X, 48 DISCLAIMER: GLOCK is a federally registered...