3CR Tactical

A standard GI / mil-spec-pattern AR-15 charging handle, CNC-machined from T6 aluminum and hard-anodized black. Built to the same envelope as the factory-issue charging handle that ships in most...

This steel combination armorer's wrench handles the core jobs on an AR-15 build or service. One tool covers the barrel nut, the castle nut on the receiver extension, and muzzle-device surfaces, with...

Free-float quad rail handguard for the AR-15. Mounts through a barrel-nut system that carries all load off the barrel and gas block, so bipod pressure, sling tension, and mounted lights or lasers...

Glock 19 threaded 9mm barrel — drop-in replacement for the Glock 19 across Gen 1 through Gen 5. Machined from 4150 chrome-moly steel and finished in salt-bath black nitride for surface hardness and...

Glock 17 drop-in 9mm barrel — factory-spec replacement for Gen 3, Gen 4, and Gen 5 G17 frames. Machined from 4150 chrome-moly steel and finished in black nitride for surface hardness, corrosion...

The 3CR Tactical 9mm replacement barrel drops directly into any Gen 3 Glock 19 frame and slide assembly. Built from 4150 chrome moly vanadium steel and finished with a hardened black nitride coating,...

9mm threaded drop-in barrel for the Glock 19 Gen 1-4. Slides into factory and aftermarket Glock 19 slides without fitting work. Threaded 1/2x28 muzzle accepts standard 9mm compensators, suppressors,...

9mm Micro CompensatorWelcome to the world of precision and control, where the 9mm Micro Compensator takes center stage. In this guide brought to you by 3CR Tactical, we delve into the intricacies of...

The Micro Compensator is threaded in the standard 1/2×28 thread pitch.It will work on most 9mm Glock barrels threaded in that pitch, including most 40-9 conversion barrels! The Micro Comp only adds...

Threaded 9mm replacement barrel for the Glock 17 Gen 1, Gen 2, and Gen 3 — drop-in fit, no slide work or hand-fitting required. 416R stainless steel, the same alloy used for match-grade rifle...

Dual latching ambidextrous charging handle with a perforated design to lighten the weight without sacrificing strength. Variants for both AR15 and AR10 patterned rifles.

This barrel is a drop-in replacement for the factory Glock 17 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Full Length4150 Premium Rose Gold finish Finish note: The rose gold PVD coating will...

Drop-in fit for Glock 19 Gen 3 and Gen 4 pistols. The 4150 chromoly steel barrel wears a titanium nitride (TiN) gold satin coating that shrugs off heat and powder fouling while giving the slide a...

Dual latching ambidextrous aluminum charging handle for 7.62 NATO or AR10/SR-25/DPMS LR-308 patterned rifles.Allows for rapid operation with either hand.Matte black with hard coat anodized finish...

The 3CR Tactical dual-latch ambidextrous AR-15 charging handle gives shooters symmetrical, rapid manipulation from either side of the rifle. Machined from aluminum and hard-coat black anodized, it...

This barrel is a drop-in replacement for the factory Glock 17 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Full Length4150 Gold Nitride satin finishFits Gen 1-4* Actual barrel finish may differ...

Discounted bundle of two of our best sellers. Get the 9mm gold Glock 17 threaded barrel with our TBC 9mm Glock comp at an unbeatable price and free shipping.Get both of these together and save. The...

This barrel is a drop-in replacement for the factory Glock 19 barrel.9mm caliberSpiral fluted1:16 twist416R Stainless Steel finish DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc...

Discounted bundle of two of our best sellers. Get the 9mm gold nitride Glock 19 threaded barrel with our TBC 9mm Glock comp at an unbeatable price and free shipping.Shop Glock...

The Glock Micro Compensator is threaded in the standard 9/16 x 24 thread pitch for .40 S&W/10mm caliber barrels. Commissioned off of our popular TBC 9mm micro compensator, this version for .40...

416R Stainless Steel Barrel1:16 Twist9mm ThreadedFits Gen 1-4. Will not work with Gen 5+P rated DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc. and is one of many trademarks...

Threaded 9mm drop-in barrel for Glock 17 Gen 1-4. Slides into factory and aftermarket Glock 17 slides with no fitting or hand-lapping. The 1/2x28 muzzle accepts standard 9mm compensators,...

Drop-in 9mm replacement barrel for Glock 19 Gen 1-4 pistols and Polymer80 PF940C builds. Cut to factory OEM dimensions so it slips into any standard Glock 19 slide without fitting work — ideal...

9mm drop-in replacement barrel for the Glock 26 Gen 1-4. Slides into factory and aftermarket Glock 26 subcompact slides without fitting work or hand-lapping. Not compatible with Gen 5 — different...

These Pistol/Handgun Hangers provide the most efficient way to store small arms. They require a shelf ledge at least 11" deep and 0.75" thick. One end clamps firmly onto the shelf ledge, the other...

A combo pack of our two best-selling house TBC and 9mm micro compensators/muzzle brakes for Glock pistols.Fits 1/2 x 28 TPI threaded 9mm barrels.Sets screws included. DISCLAIMER: GLOCK is a...

Fits Glock 19 Gen 1, Gen 2, and Gen 3 OEM frames plus Polymer80 PF940C and GST-9 builds. Not compatible with Gen 4 or Gen 5 frames — the rail geometry and recoil layout changed. This is a stripped...

3CR Tactical six-prong flash hider for the AR-15. The open six-prong design breaks up and reduces visible muzzle flash to help preserve your vision in low light.Features:Six-prong open-tine...

May require minor fitting to avoid damage to slides during mounting. Steel fixed front and rear Glock sights. Standard height.Fits all Glock models.Green fiber-optic insert on front sight for quick...

Everything needed to complete a stripped Glock 17 or Glock 22 Gen 3 slide, less the barrel and sights. All parts are built to Glock OEM spec and made in the USA — drop-in fit for factory and...