3CR Tactical

Drops onto factory Glock 43, 43X, and 43X MOS single-stack frames with no fitting required. Pair it with a Glock 43/43X completion kit and a 9mm barrel for a finished slide assembly ready to run.The...

Stripped Glock 17 Gen 1-3 raw slide designed and built exclusively for 3CR Tactical. Compatible with Glock 17 Gen 1-3 OEM frames and Polymer80 PF940V2 80% frames. Sold raw and unfinished — a clean...

Complete your Glock build with this Glock 17/19 Frame Completion Kit (Lower Parts Kit – LPK). Designed for Gen 3 Glock 17 and Glock 19 pistols as well as Polymer80 PF940C and PF940V2 frames,...

Stainless steel, matte Glock 17 replacement barrel with a durable diamond like carbon finish. This is a drop-in replacement component for the Glock 17 pistol and will fit Gen 1-3 slides with no...

Stainless steel, matte Glock 19 replacement barrel with a durable diamond like carbon finish. This is a drop-in replacement component for the Glock 19 pistol and will fit Gen 1-3 slides with no...

Drops into Glock 19 Gen 1-3 slides with no fitting work. Gen 4 and Gen 5 slides require a Gen 3 recoil rod with an adapter — confirm your recoil setup before install.Machined from 416R stainless...

Drops into Glock 17 Gen 1-3 slides with no fitting work. Gen 4 slides require a Gen 3 recoil rod with an adapter; this barrel is not compatible with Gen 5 frames.Machined from 416R stainless steel...

Polymer, white-dot front sight and blank rear sight set for small frame Glock pistols. Comes in both standard and suppressor height. White-dot front sight Blank rear sight Angled sides Includes...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C compact aftermarket frames. Drop-in assembled slide — bolt it onto your Gen 3 lower with no fitting required.Diamond-like carbon (DLC) finish on...

Fits Glock 17 Gen 1-3 OEM frames and Polymer80 PF940V2 full-size builds. Drop-in assembled slide from 3CR Tactical, finished in hard black DLC for abrasion and corrosion resistance.Ships with...

Drops into Glock 19 Gen 1-3 slides with no fitting and no fitment work. Gen 4 slides require a Gen 3 recoil rod with an adapter; Gen 5 frames are not compatible.Machined from 416R stainless steel and...

Fits Glock 19 Gen 3 OEM frames. Ships fully assembled — completion kit, sights, and cover plate are installed and verified before it leaves our Florida shop. Drop it on your Gen 3 lower and you have...

All the required internal parts to complete a Glock 26 slide and a Glock 26 or Polymer80 PF940SC frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x spring...

This Glock slide is precision machined in Melbourne, Florida, from 100% American-made 416 stainless steel. Further, its heat treated to 38-42 HRC for optimal strength and durability. Our standard...

Assembled DLC window slide built for Glock 17 Gen 3 frames. Diamond-like carbon finish gives a harder wear surface than standard nitride - resists holster rub, oil, and carbon fouling without flaking...

The Glock Micro Comp is threaded in the standard 9/16x24 thread pitch for .40S&W/10mm barrels.It will work on most .40S&W/10mm Glock threaded barrels. The Micro Comp only adds about .45" to...

17-4 Stainless Steel, 44C Rockwell Hardness (+/- 2) for durabilityStylish and corrosion resistant nickel plated finishFits 3 pin Glock frames (2013+)Fits Glock 19, 23, 32, 38 Gen 3 DISCLAIMER: GLOCK...

All the required internal parts to complete a Glock 43 slide and a Glock 43 or Polymer80 PF9SS or SS80 frame. 3CR Tactical Slide Completion Kit9mm firing pinFiring pin spring & spacer sleeve2x...

Drop-in 9mm replacement barrel for Glock 19 Gen 1, Gen 2, and Gen 3 frames. Machined to OEM chamber and lug geometry so it seats directly into your factory or aftermarket Gen 1-3 slide — no fitting,...

US made, stainless steel recoil rod assembly. OE spring weight.Upgraded component from the stock plastic recoil rod that can fail at the wrong time.Compatible with Gen 1-3 G19/23/32/38 Pistols...

This barrel is a drop-in replacement for the factory Glock 43 barrel.9mm caliberMatte, bead blasted stainless steel finish DISCLAIMER: GLOCK is a federally registered trademark of GLOCK, Inc. and is...

US made, stainless steel recoil rod assembly. OE spring weight.Upgraded component from the stock plastic recoil rod that can fail at the wrong time.Compatible with Gen 1-3 G17/22/24/31 Pistols...

Everything needed to complete a stripped Glock 19/23 Gen 5 slide, except for the barrel and sights.All parts are built to OEM spec and made in the USA. Stainless firing pinFiring pin spring &...

Fits Glock 19 Gen 1-3 OEM frames and Polymer80 PF940C aftermarket frames. Not compatible with Gen 4 or Gen 5. Stripped — barrel and internals sold separately. Hard black DLC finish on 416 stainless...

Fits Glock 17 and Glock 22 Gen 1-3 OEM frames, plus Polymer80 PF940V2 aftermarket frames. Not compatible with Gen 4 or Gen 5. Stripped slide — barrel and internals sold separately. Hard black DLC on...

Anodized black aluminum standard height sightsWhite dot for 3-dot sight pictureAngled sidesIncludes set screw for rear sight and front mounting screwFits Glock 17, 19, 26May require minor fitting

Single block CNC milled, single port compensator for 9mm barrels. Threaded for 1/2 x 28. Secures by two set screws. Helps with reducing barrel rise and felt recoil. Finished in tough DLC or TiN. 1"...

Fits Glock 26 Gen 1 through Gen 5 OEM frames and Polymer80 PF940SC aftermarket frames. Drop-in replacement for the factory barrel — no hand-fitting required. Hard black DLC finish over a 416...

This barrel is a drop-in replacement for the factory Glock 19 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Matching thread protector and O-ring installedBlack DLC (diamond like coating)Tighter...

This barrel is a drop-in replacement for the factory Glock 17 barrel.9mm caliber1:16 twistThreaded (1/2 x 28 TPI)Black DLC (diamond like coating)Now with included thread protectorFits Gen...