Assembled Glock 19 Gen 3 Compensated Combat RMR Slide — LFA

Drops onto OEM Glock 19 Gen 1-3, PF940C, GST-9, or Dagger frames — any Glock 19-pattern lower will accept this slide. Shop-assembled in our Florida facility on an LFA Cerakote stripped blank, with the compensator integrated into the slide for shorter sight recovery between shots.

Finish is professionally applied Cerakote on the slide body with a black nitride barrel underneath. Fiber optic sights are installed at mid-height to clear the optic plate, and the slide is cut for a Trijicon RMR footprint.

• Integrated compensator, 7" overall slide length
• Black nitride 9mm barrel, flush/crown cut, 1:9.84 twist
• Slide completion kit installed (firing pin, extractor, plunger, cover plate)
• Stainless steel recoil rod assembly
• Mid-height fiber optic sights pre-installed
• Trijicon RMR footprint, RMR cover plate fitted

Mounting hardware:

• Cover plate screws: 6-32 × 1/3"
• Optic mount screws: 6-32 × 7/16"

For optic install, use the optic-manufacturer mounting kit and apply blue thread locker before torquing to spec. Verify slide-to-frame fit and run 50–100 rounds for break-in before relying on the build for duty or carry. See our slide break-in guide for the full procedure.

DISCLAIMER: "GLOCK" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 3CR Tactical nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of "GLOCK" on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.