Shop-assembled Glock 19 Gen 3 slide built and function-tested at 3CR Tactical on a Stiffler Manufacturing Zoom RMR-cut slide in black Cerakote. Choose your build above: a crown-cut 9mm barrel with tall or standard sights, or no barrel so you can pair the 9mm barrel of your choice. Drops onto a Gen 3-pattern frame with no fitting required.

Features:

• Machined from heat-treated 17-4 PH stainless bar stock — tougher than the 416 stainless commonly used for pistol slides
• Stiffler Manufacturing Zoom slide, RMR-cut, black Cerakote
• Color-matched RMR cover plate installed
• Crown-cut 9mm barrel (choose above): polished stainless steel, TiN gold, Oil Slick PVD (multicolor) or Rose Gold PVD — or no barrel
• 3CR Tactical slide completion kit installed (firing pin, extractor, plunger assembly, recoil rod, cover plate)
• Sights (choose above): suppressor-height polymer sights (tall — co-witness and suppressor clearance) or standard-height polymer sights (front white dot)

No Barrel build: no barrel included. Recoil spring assembly is included.

Available builds:

• Polished Stainless Barrel, Tall Sights — also sold with the frame parts kit
• TiN Gold Barrel, Tall Sights — also sold with the frame parts kit
• Oil Slick PVD Barrel, Tall Sights — also sold with the frame parts kit
• Rose Gold PVD Barrel, Tall Sights — also sold with the frame parts kit
• Oil Slick PVD Barrel, Standard Sights — also sold with the frame parts kit
• No Barrel, Standard Sights

Fitment: Glock 19 Gen 3 and compatible Gen 3-pattern frames. Not a Gen 4 or Gen 5 fit — the Gen 4/5 slide rail cutouts and recoil-spring geometry differ.

Finish note: The Oil Slick PVD, Rose Gold PVD and TiN barrel finishes are decorative coatings. Like all PVD/TiN coatings, they can show wear at points of metal-to-metal contact (such as the barrel hood and locking lugs where the barrel meets the slide) over time with use. This is normal and does not affect reliability or function. The polished stainless barrel does not show this coating wear; expect natural carbon and brass marking from use.

Optic mounting screws (not included): use the screws supplied with your optic, or 6-32 × 1/3" for the cover plate and 6-32 × 7/16" for the optic when mounting on top of the plate.

Each slide is function-tested before shipping and will need lubricant and a normal break-in period. Verify function with your chosen barrel and carry load before relying on the build for daily carry.

DISCLAIMER: "GLOCK" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 3CR Tactical nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of "GLOCK" on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.